How to Solve FTP Connection Error: FTP Server Troubleshooting

This article explains how to solve an FTP passive mode connection error, usually caused by an improperly configured passive port range or a firewall blocking the required ports. First, check that the FTP service is running, then edit the Pure-FTPd configuration file to set an appropriate passive port range, open that range in the firewall, and restart the Pure-FTPd service to apply the changes.

Common FTP Connection Error Description

When trying to connect to your FTP server, you might see this error message:

Response: 227 Entering Passive Mode (45,35,12,173,228,133)

This usually happens because the FTP server passive port range is not properly configured, or the firewall is blocking the required ports. Let’s go step by step to fix this FTP issue.

Step-by-Step FTP Server Troubleshooting

Step 1: View the FTP Service Installed

To check whether your FTP service is running, use the following command:

netstat -ntlp

This will display all the services and their corresponding ports. If your FTP service is not listed, you may need to install or restart it.
view the FTP service installed on the server

Step 2: Edit the Pure-FTPd Configuration File

Open the FTP server configuration file with this command:

vi /etc/pure-ftpd/pure-ftpd.conf

This file controls the behavior of your FTP server.

Step 3: Modify the Passive Port Range

Inside the configuration file, find the line with PassivePortRange.
By default, it may look like this:

# PassivePortRange  5000  5000

Remove the # (comment symbol) at the beginning of the line, and change the port range to something like:

PassivePortRange 5001 5010

This opens a range of ports for passive mode connections, which is required to avoid FTP problems.
modify the passive port range

Step 4: Open Passive Ports in the Firewall

Your firewall may be blocking the passive ports. To allow them:

  1. Check firewall status:
sudo ufw status verbose
  1. Open the port range for TCP:
sudo ufw allow 5001:5010/tcp

Now your FTP server can accept passive connections without being blocked.

Step 5: Restart Pure-FTPd Service

After making changes, restart the service to apply them:

systemctl restart pure-ftpd-mysql.service

This ensures your FTP server reloads with the new configuration.

Conclusion

By following these steps, you can fix most FTP issues related to passive mode errors. We:

  • Checked the FTP service status
  • Edited the Pure-FTPd configuration
  • Updated the passive port range
  • Opened the required ports in the firewall
  • Restarted the FTP service

If you still face an FTP problem after this FTP server troubleshooting, double-check whether your FTP client is configured to use passive mode.

Keywords:

ftp issues, ftp problem, ftp server troubleshooting

Last Updated:   11/13/2026
Outline